Hitachi GR4000 Series Quick Start Manual page 71

(4) Check the information you edited.
Check the settings for the following items by displaying the configuration information you edited.
・line name for the Ethernet port 1/0，IP address
・RIP for the Ethernet port 1/0
show
!GR1(config)#
#startup configuration file
!
system name "GR1"
!
line ethernet0/0 ethernet 0/0
ip 192.168.1.1 mask 255.255.255.0
!
line ethernet0/1 ethernet 0/1
disable
!
line ethernet0/2 ethernet 0/2
disable
!
line ethernet0/3 ethernet 0/3
disable
!
line ethernet0/4 ethernet 0/4
disable
!
line ethernet0/5 ethernet 0/5
disable
!
line ethernet0/6 ethernet 0/6
disable
!
line ethernet0/7 ethernet 0/7
disable
!
line ethernet0/8 ethernet 0/8
disable
!
line ethernet0/9 ethernet 0/9
disable
!
line ethernet0/10 ethernet 0/10
disable
!
line ethernet0/11 ethernet 0/11
disable
!
line LAN1 10gigabit_ethernet 1/0
ip 192.168.2.3/24
!
rip yes
interface 192.168.1.1
interface 192.168.2.3
!
snmp "NETWORK-A" 192.168.1.2
!
!GR1(config)#
(5) Save the information you input.
save
!GR1(config)#
GR1(config)#
QSGGR4K00-10 5794047-1X
GR4000 Quick Start Guide, Revision 1 - Preliminary
...Display the contents you input.
Line name
Interface type
Slot No./Line No.
...The information you input will be saved.
Display of configuration
information
55