Philips 43PUH6101/88 Service Manual page 13

KEYBOARD CONTROL
(1057)
E
4.2 Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3 Assembly/Panel Removal(for 6101 & 6121
series)
Instructions below apply to the 43PUS6101/12, but will be
similar for other 43"/49"/55"/65"Pxx61x1 series models.
4.3.1 Rear Cover
Refer to Figure 4-7 and
Warning: Disconnect the mains power cord before removing
the rear cover.
1. Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set.
2. Remove the fixation screws [2], [3] and [4] that secure the
rear cover. Refer to
3. Unplug the connector [5] from SSB. Refer to
details.
4. Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
CN9201
CN9101
MAIN POWER SUPPLY
A
(1054)
LOUDSPEAKER
(1184)
Figure 4-6 Cable dressing (65" 6121 series)
Figure 4-8 for details.
Figure 4-7 for details.
Figure 4-8
Mechanical Instructions
ECN701
CN8602
WIFI MODULE
W
WiFi01
IR/LED BOARD
J
CN1
(1056)
for
back to
div.table
TPL16.1E LA 4.
CN701
CN412
SSB
B
(1053)
LOUDSPEAKER
(1184)
EN 13
20112_102.eps
2016-Sep-23