Bolt (1/4 X 1-3/4 Inch); Washer (1/4 Inch); Serrated-Flange Nut - Toro Multi Pro 1750 Operator's Manual

2
1
Figure 21
1. Straight-barbed fitting (1/2
inch NPT x 1/2 inch)
2. Pressure filter
2. Assemble the pressure-filter assembly onto the rinse
pump at the nipple (Figure
Note: When the nipple is tight, ensure that the filter
and pump are aligned vertically.
2
1
Figure 22
1. Pressure-filter assembly
3. Secure the rinse pump and rinse pump mounting
bracket to the valve mount
bolts (1/4 x 1-3/4 inch), 4 washers (1/4 inch), and 4
serrated-flange nuts (1/4 inch).
3
g024704
3. Nipple (1/2 inch NPT x 1/2
inch)
22).
g025034
2. Rinse pump
(Figure 23) with the 4
1
2

1. Serrated-flange nut (1/4

inch)
2. Rinse-pump mounting
bracket
3. Rinse pump

4. Bolt (1/4 x 1-3/4 inch)

4. Install a straight-barbed fitting (1/2 inch NPT x 1/2
inch) into the inlet port of the rinse pump.
5. Secure the rinse-pump cover to the rinse-pump
mounting bracket with the 2 hair pins.
13
8
7
5
3 4
6
g025042
Figure 23
5. Rinse-pump cover
6. Hairpin

7. Washer (1/4 inch)

8. Straight-barbed fitting (1/2
inch NPT x 1/2 inch)