Canon imageRUNNER 1750 Series Service Manual page 107

2
Technical Explanation > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance
5) Proxy Settings
1. If proxy server is set, touch the [System Settings] > [Network Settings] > [TCP/IP
Settings] > [Proxy Settings] buttons.
2. Set the proxy server based on the result obtained in "(2) Advance preparations -
Information item 3".
a) Use Proxy to [On].
b) Enter the server address.
c) Enter port Number (Validation: 1 to 65,535).
d) If proxy server authentication is required, Touch [Set Authentication].
2 Technical Explanation > Embedded RDS > E-RDS Setup > Confirmation and preparation in advance
F-2-115
F-2-116
e) Set the following items based on the result obtained in "(2) Advance preparations
- Information item 4".
• Set Use Proxy Authentication to [On].
• Enter User name and Password, and touch the [OK] button.
f) Touch the [OK] button.
3. Touch the [Close] button.
4. Touch the Reset button to quit the Additional Functions.
5. Reboot the device.
CAUTION:
When changes are made to the above-mentioned network settings, be sure to reboot
the device.
2-79
F-2-117
2-79