Siemens MOBILETT Plus Manual page 12

3 - 2
The MOBILETTs are equipped with a double articulated arm system. The tube assembly
is adjustable in both the vertical and radial directions. The flexibility of the articulated arm
is the result of a linkage and articulation system. The stability of the articulated arm and
tube assembly positions is due to adjustable frictional forces in the joints.
The articulated arm must be positioned and locked in the transport safeguard during
transport and parking.
A solenoid actuated turn plate is simplifies the central beam setting and positioning. The
unit can easily be manually rotated around its own axis and the position of the articulated
arm and tube can be changed without having to change the position of the unit.
A measuring tape can be pulled out from the multileaf collimator and manually adjustable
collimator lids for limiting the area of exposure on the patient and film complete the range
of features available for simplifying settings.
The potential equalizer (Fig. 1) can be connected to a Protective Earth Terminal with the
potential equalizer connector found next to the transport safeguard. This will ensure that
the MOBILETT has the same electrical potential as other units connected to the same
Protective Earth Terminal.
The hand brake can be used, when needed, during transport and for securely parking the
unit, see Fig. 2
The display with selection buttons, as well as the audiovisual signals, simplify the use of
the unit for both medical and technical staff.
The Instructions for Use describe the correct operation of the MOBILETTs.
MOBILETT Plus/ Plus E
Fig. 2
Register 6 SPR8-215.850.02
Rev. 01
General Description
Page 2 of 4
01.02 SPS-UD
Siemens-Elema AB
Solna, Sweden