Connection Panel - LG LST-4200A Owner's Manual

Connection Panel Overview
ote
Your HDTV Receiver can be connected to use a TV as the viewing device. Since the
receiver has a built-in tuner, a monitor can be used instead for the viewing device.
ANT IN
Connect to HDTV signal source; over-the-air antenna or cable service.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
ANT LOOP OUT
RF output to TV's "Antenna In" jack or other devices.
AUTHORIZED SERVICE ONLY
Reserved for authorized service purposes.
COMPONENT VIDEO OUT
Connect to a TV/Monitor with YPbPr inputs.
Variable AUDIO OUT (Left/Right)
Connect to a TV, Amplifier, Receiver or Stereo System.
S-VIDEO OUT
Connect to a TV/Monitor with S-Video inputs.
VIDEO OUT (MONITOR OUT)
Connect to a TV/Monitor with Video inputs.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
RGB OUT
Connect to a TV with RGB inputs.
AC Power Cord
Plug into the power source.
DVI OUT
Connect to a TV with a DVI connector.
Do not touch the inner pins of the
jacks on the rear panel.
Electrostatic discharge may cause
permanent damage to the unit.
9