Siemens SIMATIC Ident CB Gate Operating Instructions Manual page 54

Operation via the CB Gate user interface
8.2 Menu items
Information/
parameter
Local port
Sent bytes
Received bytes
Only send new data
Interval for
continuous sending
Result id
Previous result id
Telegram id
Restart server
54
Description
Local port of the TCP server via which the TCP connection can be established.
Note: Note that it is only possible to change the port if the TCP server is
disabled.
Number of bytes that the TCP server sent to the client.
Number of bytes that the TCP server received from the client.
Switch to enable/disable the send function
When the function is disabled, data is sent to the client at defined intervals,
depending on the set interval time. When the function is enabled, data is only
sent to the client when new data is present.
Input box to enter the interval at which the TCP server sends data to the client.
Note: Note that the interval time can only be changed if the TCP server and the
function "Only send new data" have been disabled.
ID of the current read result
Range of values: 1...65535
When the end of the range of values is reached, the counter starts again at 1.
ID of the previous read result
Range of values: 1...65535
ID of the current, last sent telegram
Range of values: 1...65535
When the end of the range of values is reached, the counter starts again at 1.
Button for restarting the TCP server
Note that a restart has the result that the connection to the client is terminated
and then re-established. The displayed parameters are reset.
Operating Instructions, 08/2022, C79000-G8976-C671-01
SIMATIC Ident CB Gate