D-Link DIR-822 User Manual page 104

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Parameter
Gateway IP address
Hostname
Figure 88. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Parameter
Mode of dynamic IP
address assignment
Available if the Access point, Repeater, or Client mode was
selected in the Initial Configuration Wizard.
The gateway IPv4 address which is used by the router to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
The name of the device assigned to its IPv4 address in the local
subnet.
Dynamic IP Addresses
An operating mode of the router's DHCP server.
Disable: The router's DHCP server is disabled, clients' IP
•
addresses are assigned manually.
Server: The router assigns IP addresses to clients
•
automatically in accordance with the specified parameters.
When this value is selected, the Start IP, End IP, Lease
time fields and the DNS relay switch are displayed on the
tab. Also when this value is selected, the DHCP Options,
Static IP Addresses, and Hosts sections are displayed on
the tab.
Page 104 of 235
Configuring via Web-based Interface
Description
Description