DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Parameter
Name
Action
Protocol
IP version
Direction
A name for the rule for easier identification. You can specify any
name.
Select an action for the rule.
Allow: Allows packet transmission in accordance with the
•
criteria specified by the rule.
Deny: Denies packet transmission in accordance with the
•
criteria specified by the rule.
A protocol for network packet transmission. Select a value from the
drop-down list.
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
The direction of network packet transmission to which the rule will
be applied. Select the source of the packet direction from the
Source drop-down list.
WAN: The rule will be applied to the packets transmitted
•
from the external network.
LAN: The rule will be applied to the packets transmitted
•
from the local network.
IPsec: The rule will be applied to the packets transmitted
•
from the IPsec tunnel (available if an IPsec tunnel has been
created on the device).
Select the destination of the packet direction from the Destination
drop-down list.
Router: The rule will be applied to the packets transmitted
•
to DIR-822.
WAN: The rule will be applied to the packets transmitted to
•
the external network.
LAN: The rule will be applied to the packets transmitted to
•
the local network.
IPsec: The rule will be applied to the packets transmitted to
•
the IPsec tunnel (available if an IPsec tunnel has been
created on the device).
From the Source interface and Destination interface drop-
down lists, select source and destination interfaces for which the rule
will be applied. Leave the Auto values to apply the rule to all
created WAN interfaces.
Page 180 of 235
Configuring via Web-based Interface
Description