D-Link DIR-822 User Manual page 119

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Parameter
Broadcast wireless
network
Clients isolation
Enable guest network
If the wireless network broadcasting is disabled, devices cannot
connect to the wireless network. Upon that DIR-822 can connect to
another access point as a wireless client.
To enable/disable broadcasting on a schedule, click the Set
schedule icon (
down list, select the Create rule value to create a new (see the
Schedule section, page 204) or select the Select an existing one
value to use the existing one. Existing schedules are displayed in the
Rule name drop-down list.
To enable broadcasting at the time specified in the schedule and
disable it at the other time, select the Enable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button. When the wireless connection is disabled, the device
will not be able to enable broadcasting of this wireless network on
schedule.
To disable broadcasting at the time specified in the schedule and
enable it at the other time, select the Disable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button.
To change or delete the schedule, click the Edit schedule icon
( ). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
If you created an additional network, you can configure, change or
delete a schedule for each network. To do this, click the button in the
line of the network.
Move the switch to the right to forbid wireless clients of this
wireless network to communicate to each other.
This function is available for the additional network. Move the
switch to the right if you want the devices connected to the
additional network to be isolated from the devices and resources of
the router's LAN.
Page 119 of 235
Configuring via Web-based Interface
Description
). In the opened window, from the Rule drop-