D-Link DIR-822 User Manual page 48

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
In order to let wired PCs connected to your device access the network of a wireless router, on the
Device mode page, from the Connection method list, select the Autonomous value. Then
from the Work mode list select the Client value. In this mode you can change the LAN IP
address, connect your device to another access point and set your own password for access to the
web-based interface of the device.
Figure 37. Selecting an operation mode. The Client mode.
Page 48 of 235
Configuring via Web-based Interface