Building Technologies
CPS Fire Safety
2. In the left-hand bar, select the communication node:
–
For NK822x, click the LON icon
–
For NK823x, click the USB icon
Linking the CS6 to the communication network
Drag and drop the CS6 node to the CerCom/LON node (for NK822x) or to the
l
USB node (for NK823x).
a When the link is established, a new node appears on the structure tree, and its
properties can be seen on the Node tab.
Note: The valid link position for Cerloop is always the same main node,
representing the entire loop. The valid link positions on NK8000 units are
distributed along the subsystem lines.
Note: Composer helps you in recognising a valid link by showing a shortcut Link
icon
instead of the circle No-link icon
Linking CS6 to NK822x
Configuring intrusion control units
Configuring a CS6 Guarto
.
.
.
2
27
A6V10359489_a_en
30.09.2016