3. Remove the DC connectors and use a cable cutter to cut off the terminals of DC input power
cables. Set the cables aside for future use.
The DC terminals of SUN2000L-(4.125KTL–4.95KTL)-JP must be cut off. If the DC connectors of
SUN2000L-(4.125KTL–4.95KTL)-JP are directly connected to SUN2000-4.95KTL-NHL2, the
SUN2000 may be burnt.
DC input terminals
4. Remove the signal cable connector from the COM port for future use.
5. Disconnect the PE cable and remove the crimped OT terminal. Set the cable aside for future use.
COM port (COM)
2
Cable
cutter