Narrow Overlock / Rolled Hemming Stitch - Brother 884-B20 Owner's Manual

Three-thread overlock stitch 2.8 mm
(7/64 inch)
Use three threads and the right needle, producing
2.8 mm (7/64 inch) seams.
Use: For overlock stitching on suits, blouses,
slacks, etc. Ideal for fine to medium materials.
NOTE:
Remove the left needle when sewing this overlock
stitch.
Narrow overlock / Rolled hemming
stitch
The Narrow overlock / Rolled hemming stitch is
a decorative finish for lightweight to midweight
fabrics. It is often used to complete the edge of
a fabric. This stitch is sewn by removing the left
needle and using the 3-thread overlock stitch.
Use as decorative or finishing stitch.
Two-thread overlock stitch 5 mm (3/16
inch)
Use two threads and the left needle, producing 5
mm (3/16 inch) seams.
Use: For overlock stitching on suits, blouses,
slacks, etc. Ideal for fine to medium materials.
Two-thread overlock stitch 2.8 mm (7/64
inch)
Use two threads and the right needle, producing 2.8
mm (7/64 inch) seams.
Use: For overlock stitching on suits, blouses,
slacks, etc. Ideal for fine to medium materials.
24

Narrow overlock / Rolled hemming stitch

Instructions for Narrow overlock /
Rolled hemming stitch
CAUTION
Turn off the machine before removing/installing
the needle.
NOTE:
For the recommended thread and needle,
see "CHAPTER 4 SEWING MATERIALS,
THREADS AND NEEDLES COMPARISON
CHART".
1. Remove the left needle.
2. Thread the machine for the three-thread
overlock, using the right needle.
3. Pull lever <A> toward you to lower the stitch
finger.
<B>: Stitch finger lowered
NOTE:
For normal overlock stitching, the stitch finger
is used. In that case, return the stitch switching
lever <A> to its original position.
<C>: Stitch finger raised