Maintenance And Safety Inspection; Daily Inspection; Store - Hitachi C41V1 Instruction Manual

6. Maintenance and Safety Inspection

6.1 Daily Inspection

6.1.1 Visually inspect the surface of the probe head, housing,
cable and connector for any crack, scratch or
denaturalization. If you find any damage, do not use the
probe and contact a service support immediately.
6.1.2 Visually inspect the surface of the Magnetic sensor
attachment for any crack, deformation or denaturalization.
If you find any damage, do not use it and contact a service
support immediately.
6.2 Storage
After using the probe and accessory, they should be cleaned
and disinfected/sterilized according to "5. Cleaning, disinfection
and Sterilization" immediately. Then store them in a cool and dark
place, and keep out of high temperature, humidity and direct
sunlight.
- 26 - Q1E-EP1432