Table of Contents
Advertisement
Installation Mode
3.2
Wall-mounting
Install the SmartLogger on a wall that is flat and has the bearing capacity to securely hold the
SmartLogger which weighs 3800 g.
1. Determine mounting holes
based on the hole positions
in the mounting ears, and
mark the mounting holes
using a marker.
If you need to use a ladder to install the device on a high position, take measures to protect
yourself from falling down.
2. Drill holes by using a hammer drill and install expansion sleeves, washers, and tapping screws.
Unit: mm
3. Put the tapping screws through the SmartLogger mounting ears and washers into the mounting
holes in the wall.
Unit: mm
Screw assembly for wall-mounting:
(1) ST3.5 tapping screw
(2) Washer
(3) Expansion sleeve
6
Advertisement
Table of Contents
