Mitsubishi Electric 800 Series Instruction Manual page 3

 Injury Prevention
CAUTION
 The voltage applied to each terminal must be as specified in the Instruction Manual. Otherwise an explosion or damage may occur.
 The cables must be connected to the correct terminals. Otherwise an explosion or damage may occur.
 The polarity (+ and -) must be correct. Otherwise an explosion or damage may occur.
 While power is ON or for some time after power OFF, do not touch the inverter as it will be extremely hot. Touching these devices may cause
burns.
 Additional Instructions
The following instructions must be also followed. If the product is handled incorrectly, it may cause unexpected fault, an injury, or an electric shock.
CAUTION
Transportation and installation
 Do not install or operate the plug-in option if it is damaged or has parts missing.
 Do not stand or rest heavy objects on the product.
 Ensure the mounting orientation of this product is correct.
 Foreign conductive objects must be prevented from entering the inverter. That includes screws and metal fragments or other flammable
substance such as oil.
 If halogens (including fluorine, chlorine, bromine, and iodine) contained in fumigants for wood packages enter this product, the product may
be damaged. Prevent the entry of fumigant residuals or use an alternative method such as heat disinfection. Note that sterilization or
disinfection of wood packages should be performed before packing the product.
Trial run
 Before starting operation, confirm or adjust the parameter settings. Failure to do so may cause some machines to make unexpected
motions.
WARNING
Usage
 Do not modify the product.
 Do not remove any part which is not instructed to be removed in the Instruction Manuals. Doing so may lead to a failure or damage of the
product.
3