Jumper And Fuses On The Printed Circuit Boards - Siemens 7XT3300-0 A00/DD Series Manual

7XT3300-0*A00/DD

Jumper and Fuses on the Printed Circuit Boards

Power supply module C53207-A332-B12- of 7XT3300-0*A00/DD
*)
NZT
C53207-A332-B12-
Figure 3 Power supply module with location of the fuses
C53000-B119U-C129-1
Fusible cut-out insert 4AT, type 5 x 20 mm
a) Schurter 0001.2510
b) Siba 179200 4A
c) SOC SHV12 4A
Fusible cut-out insert 5AT
a) Schurter OMK 125
b) Littelfuse Series 154 154.005
Note: Replace the fuse only by the original type
because the holders are designed for this type
only.
4AT *)
F301
The fusible link inserts must be replaced only by
the types mentioned. If other types are used , the
parameters and properties given for the device
no longer apply .
3404.2317.11
F103
4AT *)
F102
F101
English
5A
F602
11