Login; Disconnecting Pcpro From The System; Download; Accessing Download - NEC SL1100 Pc Programming Manual

Issue 3.01
___________________________________________________________________________________
2.3
S 3 D
ECTION OWNLOAD
Downloading pulls all the data off the system and loads it into PCPro. A download can
only occur when PCPro is connected to a system.
3.1
___________________________________________________________________________________
A - 8
2.2.3

Login

Specify the User Name and Password that will allow the connection.
The account must exist within the chassis settings 90-02. Like PCPro
Accounts, Login Accounts govern what system data can be
accessed from the chassis.
It is important to note, Login Accounts are not the same as PCPro
Accounts. Thus both chassis Login and PCPro Account settings are
NOT synchronized and are independent of each other.
Once connected, the PCPro access level changes to match the level
assigned to the user name/password used to connect. This access
level is set in 90-02 on the chassis. For example, if you start PCPro
in Installer (IN) mode, but connect to a chassis using an account with
an access level of System Administrator Level 1 (SA), after
connecting PCPro assumes the access level of SA. Once you are
disconnected, PCPro reverts back to the access level IN.

Disconnecting PCPro from the System

While PCPro is connected to a system, you can disconnect using one of the
following methods:
1. Select the menu item
or...
2. Select the icon depicting the connected black and yellow plugs
or...
3. Press F5.
All communication methods, excluding 'Connect/Disconnect', are disabled
and the 'Connect/Disconnect' toolbar icon changes status to disconnected.

Accessing Download

When PCPro is connected to a system, access the Download dialog using one
of the following methods.
Select the menu item

Communications > Connect/Disconnect.
Ribbon Item Home >
NEC SL1100

Download.

.