Chapter 2 Installation; System Requirements; Table 2-1 System Requirements - NEC SL1100 Pc Programming Manual

Chapter 2
S 1 S
ECTION YSTEM
The process of installing PCPro is straight-forward. Just run the installation program
and follow the instructions.
requirements necessary for install PCPro on your computer.
CPU
Memory
OS
Other
Communication port
Disk Space
TCP Port
___________________________________________________________________________________
PC Programming Manual
Installation
R
EQUIREMENTS

Table 2-1 System Requirements

Table 2-1 System Requirements
Pentium
Pentium 4 2.5 GHz (recommended)
128 MB of RAM
256 MB (recommended)
Windows XP, Vista, Windows 7 (32/64-bit)
Microsoft Internet Explorer 8.0 or higher
LAN, RS232 or Modem
25MB for PCPro (minimum)
PCPro must have TCP port 8000 open between the chassis and
the host PC. Communications between PCPro and the chassis
occurs on this port when uploading-downloading via LAN.
The PCPro TCP port is 8000 at default, but this can be changed
through the Administration>WebPro Settings section of WebPro,
or using PRG 90-54-02 in Web Pro, PCPro or Phone
Programming.
TCP port 5963 is required to be open if the Debug Terminal is
going to be used.
®
III 598 MHz (minimum)
lists the minimum system
2 - 1