Using A Standard View Screen; System - NEC SL1100 Pc Programming Manual

NEC SL1100
___________________________________________________________________________________
2.2
S 3 S
ECTION YSTEM
The System section of the Standard View is used to define the most common system
wide settings in the SL1100. The System section consists of Config, Options, Blades/
Ports, Numbering, Dialing Rules, Class of Service, Timers, Speed Dials, VOIP,
VoiceMail, SLNet, ACD, and Hotel/Motel settings. Each of these subsections will be
displayed later in this section.
___________________________________________________________________________________
PC Programming Manual

Using a Standard View Screen

Each Standard View screen contains different programming items. However,
the following common methods apply:
1. Select the Standard View screen from the Standard View menu relevant
to the desired task.
2. Modify settings on the screen.
3. Press the Apply button to save the changes.
The method in modifying settings for each screen is explained in the help
menu.
The remainder of this chapter discusses the individual options available from
the Standard View submenu.
Issue 3.01
4 - 3