NEC SL1100 Pc Programming Manual page 185

NEC SL1100
___________________________________________________________________________________
To use a Wizard to program a feature:
1.
2.
3.
4.
5.
___________________________________________________________________________________
PC Programming Manual
Select the feature Wizard from the Wizard View submenu.
Modify the desired settings on the screen.
Navigate to the next screen in the Wizard by either selecting the desired page
from the View page in wizard or by pressing the Next or Back navigational
buttons.
Complete steps 2 and 3 until all screens are finished.
Apply the changes.
When programming a Wizard, changes to system data are applied:
when you press the Apply button.

when you move to a different page in the Wizard.

when you exit the Wizard, except in the case when the Cancel button is pressed.

The Cancel button only discards changes made on the current screen. It will not
undo all changes made in the Wizard.
Issue 3.01
5 - 5