Table of Contents
Advertisement
Quick Links
Bucket Mount Kit
Titan
Model No. 136-9045
This product contains a chemical or chemicals known to the State of California
Safety
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Maximum weight is 11 kg (25 lb)
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
HD Series Riding Mower
Proposition 65 Warning
to cause cancer, birth defects, or reproductive harm.
136-1680
Register at www.Toro.com.
WARNING
CALIFORNIA
decal136-1680
Form No. 3417-280 Rev A
Installation Instructions
Original Instructions (EN)
All Rights Reserved *3417-280* A
Printed in the USA
Advertisement
Table of Contents
Related Manuals for Toro 136-9045
Summary of Contents for Toro 136-9045
- Page 1 Form No. 3417-280 Rev A Bucket Mount Kit Titan ® HD Series Riding Mower Model No. 136-9045 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
-
Page 2: Installation
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. – No parts required Prepare the machine. Upper mount Main bracket Top bracket Lower support bracket Welded support bracket Carriage bolt (5/16 x 7/8 inch) Install the kit. -
Page 3: Assembling The Kit
Assembling the Kit Assemble the kit as shown in Figure 2. Ensure to loosely install the upper mount to the main bracket; refer to Figure 3 to determine which hole to use in the upper mount. Note: Install the lower support bracket only if you are mounting the kit in front of the rear tires. Install the bracket so that the large face is oriented rearward on the machine;... -
Page 4: Mounting Locations
g037081 Figure 3 1. Use this hole if you are mounting the kit in front of the left, 3. Use this hole if you are mounting the kit in front of the right, rear tire. rear tire. 2. Use this hole if you are mounting the kit in any location behind the rear tires. - Page 5 Mounting the Kit in Front of the Rear Tires For 2017 and Older Machines Secure the mount assembly to the console cover using 2 bolts (5/16 x 1 inch) and 2 nuts (5/16 inch) as shown in Figure 5 Figure Tighten the fasteners securing the upper mount to the main bracket.
- Page 6 Mounting the Kit in Front of the Rear Tires For 2018 and Newer Machines Secure the mount assembly to the console cover using 2 bolts (5/16 x 1 inch) and 2 nuts (5/16 inch) as shown in Figure 5 Figure Tighten the fasteners securing the upper mount to the main bracket.
- Page 7 g225471 Figure 9 Mounting the kit to the right side of the machine Secure the lower support bracket to the inner support bracket under the console cover using 1 bolt (5/16 x 7/8 inch) and 1 nut (5/16 inch) as shown in Figure Note: You will not use the bottom hole in the main bracket or lower support bracket.
- Page 8 Mounting the Kit to the Side of the Engine Guard Secure the mount assembly to the side upper guard using 2 bolts (5/16 x 1 inch) and 2 nuts (5/16 inch) as shown in Figure 11 Figure Tighten the fasteners securing the upper mount to the main bracket. Secure the bottom of the main bracket to the engine guard using 1 carriage bolt (5/16 x 7/8 inch) and 1 nut (5/16 inch) as shown in Figure 11...
- Page 9 Mounting the Kit to the Rear Engine Guard Secure the mount assembly to the rear upper guard using 2 bolts (5/16 x 1 inch) and 2 nuts (5/16 inch) as shown in Figure 13 Figure Tighten the fasteners securing the upper mount to the main bracket. Secure the bottom of the main bracket to the rear engine guard using 1 carriage bolt (5/16 x 7/8 inch) and 1 nut (5/16 inch) as shown in Figure 13...
-
Page 10: Operation
1. Add a front-weight kit when 2 or more accessory-mount kits are installed at these positions. Operation Mounting Attachments Use only Toro-approved attachments and accessories. The maximum capacity is 11.3 kg (25 lb). Use the holes in the mounting brackets to secure attachments or accessories. - Page 11 Notes:...