Table of Contents
Advertisement
72/128 Commissioning
Bosch Rexroth AG, CytroBox, RE 51057-B/11.19
To fill the hydraulic power unit you should proceed as follows:
▶
Open the front door at the bottom and connect a filling unit to the quick-release
coupling type CEJN567-G1/2-020-105676200, see Fig. 21, pos. 2.
For further information on the connector plug, please refer to chapter 17.4
"Accessories".
▶
Note the required oscillating volume and the maximum filling level.
Fig. 21: Filling options
1 Oil level indicator
Recommendation: Experience has shown that the cleanliness class required for
the operation of the machine/system is already exceeded with new hydraulic fluids
in the original packing drum.
If you want to ensure the cleanliness class, carry out the filling of the hydraulic
power unit using a special filling unit, if necessary, or use a filter station with
a 10 µm fine filter.
2
2 Filling coupling
1
Advertisement
Table of Contents
