Table of Contents
Advertisement
84/128 Commissioning
PROFINET®
Bosch Rexroth AG, CytroBox, RE 51057-B/11.19
The commissioning instructions "IndraDrive with PROFINET® - example with Siemens
SIMATIC S7" (R911341342), see chapter 1.2 "Required and amending documentation"
describe the detailed configuration of the control system and the IndraDrive. Below,
the major steps for the IndraDrive are described.
1. Activating the field bus (P-0-4089.0.1 = 4)
Fig. 29: Field bus start dialog
Restart (C6400) required!
2. The slave address (P-0-4025) can be set optionally; the communication is
IP-based and is configured via the device name on the superior controller.
Advertisement
Table of Contents
