Switches / Controls; Ignition / Headlight Switch; Awd / 2Wd / Turf Switch - Polaris RANGER ETX 2015 Owner's Manual

SWITCHES / CONTROLS

IGNITION / HEADLIGHT SWITCH

1. Open the hood (see Chapter 5).
2. Disconnect the ignition
depressing the connector lock and pulling on the
connector. Do not pull on the wiring.
3. Inspect the switch connections and test the switch
for continuity.
• Turn the ignition key to ON LIGHTS. There should be
continuity between switch pins C and D; A, E and F.
• Turn the ignition key to ON. There should be continuity
between switch pins C and D; E and F.
• Turn the ignition key to START. There should be
continuity between switch pins A and B; C and D; E
and F.
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.

AWD / 2WD / TURF SWITCH

1. Remove the dash panel from the dash (see Chapter
switch harness, by
2. Disconnect the switch harness (Gray, Orange/White,
3. Inspect the switch connections and test the switch
• When the switch is in position #1 (AWD), there should
be continuity between terminals 2 (Orange/White) and
3 (Gray).
• When the switch is in position #3 (TURF), there should
be continuity between terminals 1 (White/Green) and 2
(Orange/White).
5).
Brown, White/Green), by depressing the connector
lock and pulling on the connector. Do not pull on the
wiring.
for continuity.
ELECTRICAL
11
11.5