Switches / Controls Service - Polaris RANGER 1000 2020 Service Manual

SWITCHES / CONTROLS SERVICE

IGNITION KEY SWITCH
1. Disconnect the key switch harness by lifting the
connector lock and pulling on the connector. Do not
pull on the wiring.
2. Test between the 3 sets of outputs (OFF / ON /
START). If any of the tests fail, replace ignition switch
assembly.
• Turn the ignition key to ON. There should be continuity
between switch pins B and C.
• Turn the ignition key to START. There should be
continuity between switch pins B and C; A and D.
PIN
P1
P2
P3
P4
9850045 R01 - 2020-2021 RANGER 1000 Service Manual
© Copyright Polaris Inc.
INTL MODELS
LOCATION
A
B
C
D
CHASSIS / BODY ELECTRICAL
12
12.17