Troubleshooting - Motorola HDT101 User Manual

TROUBLESHOOTING

If you encounter a problem with your HDT101, review this
troubleshooting section before calling your service provider. This
information will help you quickly solve a problem. If you're unable to
solve the problem, contact your service provider.
Problem
The LED on
POWER
the front panel does
not light up
No picture
Poor picture
quality
Possible Solutions
Confirm the power cord is plugged into a functioning
power outlet.
Press on the front panel to see if the LED
POWER
lights up.
Determine if the HDT101 is in standby mode by
pressing
STANDBY
Verify that all cables are connected properly
(hand-tighten if necessary).
If you are watching TV using your VCR, be sure your
VCR is on.
Verify that the TV is directed to the proper input
source.
Your TV may not support the current video output
.
format. Press
V FORMAT
Verify that all cables are connected properly
(hand-tighten if necessary).
Check the antenna and make sure it is aligned to the
correct direction.
Check the signal's strength and quality. Press
display the i-Banner and review the color bars at the
bottom of the window. If any of the bars are red, adjust
your antenna and try again.
45
on the remote control.
to try another format.
to
INFO