Table of Contents
Advertisement
Operation
6.1
Safety
6.1.1
Safety instructions during operation
Switching on the machine
NOTICE
Damage to the machine or premature bearing failure
The bearings can be damaged if the following is not observed.
• It is absolutely crucial that you maintain the permissible vibration values
• In operation, observe the vibration values in accordance with ISO
• Under all circumstances maintain the minimum radial load of
• Take the appropriate measures to reduce bearing currents. Observe the
!
DANGER
Hazardous voltages
Electrical machines are at hazardous voltage levels. Contact with
these can result in death, serious injury or material damage.
Operating the machine on a line supply system with a non-
grounded neutral point is only permitted for short periods of
time that occur rarely, e.g. the time leading to a fault being
eliminated. Cable ground fault EN / IEC 60034-1.
to avoid damage to the machine or its destruction.
10816.
cylindrical roller bearings of 50% corresponding to what is specified in
the catalog.
Chapter Converter operation.
6
117
Advertisement
Table of Contents
