Table of Contents
Advertisement
Installation
Observe the following when carrying out any work on the machine:
• Comply with the general safety instructions.
• Comply with the applicable national and sector-specific regulations.
• When using the machine within the European Union, comply with the
specifications laid down in EN 50110-1 regarding safe operation of electrical
equipment.
Explosion hazard when making modifications to the machine
Substantial modifications to the machine are not permitted – or may only
be performed by the manufacturer. Otherwise an explosion can occur in an
explosive atmosphere. This can result in death, serious injury or material
damage.
• If necessary, please contact the service center.
3.1
Preparation before installation
3.1.1
Requirements for installation
Note
Note also the technical data on the rating plates on the motor enclosure.
NOTICE
Damage to the motor
To avoid material damage, before commissioning, check whether the
correct direction of rotation of the machine has been set on the customer
side, e.g. by decoupling from the driven load.
Damage to mounted parts and components as a result of high
temperatures
The motor components get very hot during operation. High temperatures can
82
3
Advertisement
Table of Contents
