Advertisement
About HDMI cable
≥Please use High Speed HDMI Cables that have the
HDMI logo (as shown on the cover).
≥When outputting 1080p signal, please use HDMI
Cables 5.0 meters or less.
≥Recommended Panasonic HDMI cable part
number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m),
RP-CDHS50 (5.0 m), etc.
≥ The HDMI connection supports VIERA Link "HDAVI
Control" (
84).
However, to perform PAUSE LIVE TV (
TV Recording (
35) for programmes that cannot be
received by this unit, you need to connect a 21-pin Scart
cable.
([BWT800] VIERA Link "HDAVI Control" can only be used
on the connection from the HDMI (MAIN) terminal.)
≥ You cannot connect this unit to DVI devices that are
incompatible with HDCP.
Depending on the device, images may not display
properly or at all when connecting with a DVI/HDMI
switching cable. (Audio cannot be output.)
≥ If you are connecting to a TV that is only compatible with 2
channel audio output, audio with 3 channels or more will
be down mixed and output as 2 channels, even if
connecting with an HDMI cable. (Some discs cannot be
down mixed.)
When the unit is not to be used for a long time
To save power, unplug it from the household mains
socket. This unit consumes a small amount of
power, even when it is turned off
[approx. 0.2 W ("Power Save in Standby" is
activated and "RF OUT ( Aerial Signal )" is set to
"Off")]
When connecting the Set Top Box or
video equipment
30) and Direct
A 21-pin Adaptor is required for AUDIO/VIDEO
§
terminal.
DO NOT
VCR
This unit
This unit's rear panel
AV2 (EXT)
※
AV
Set Top Box or video equipment
(Satellite receiver, CATV, VCR, etc.)
Connect the unit directly to the TV
If you connect the unit through an
AV selector or VCR to the TV, video
TV
signal will be affected by copy
protection systems and the picture
may not be shown correctly.
≥When connecting to a TV with a
built-in VCR
Connect to the input terminals on
the TV side if there are both TV
and VCR input terminals.
21-pin
Scart cable
11
VQT3C13
Advertisement
