Advertisement
Settings
∫ Network Easy Setting ( Internet
Connection Test )
≥If there is no problem, the following screen is
displayed.
Network Easy Setting (Internet Connection Test)
Completed.
- Connection to the internet
Network connection check has finished.
Internet functions are available.
Press OK.
OK
≥If there is any problem, the following message is
displayed on the screen.
Display
Cannot find the
server. (B019)
No connection
could be made to
the server.
(B020)
To restart Network Easy Setting
1 Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Network Easy Setting" in "Network", then
press [OK].
To redo settings individually
1 Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Network Settings" in "Network", then press
[OK].
4 Select "IP Address / DNS Settings" (
"Proxy Server Settings" (
Check security before using Home Network
( DLNA ) Server function
If you set "Home Network ( DLNA ) Server function"
to "On", all connected devices on the same network
can access this unit. Ensure that the router for your
home network has adequate security system to
prevent unauthorized access.
18
VQT3C13
: Pass
Check the following
≥"Primary DNS" and
"Secondary DNS" settings
of "IP Address / DNS
Settings" (
100)
≥The server may be busy or
the service may have been
suspended. Please wait a
few moments, and then try
again.
≥Settings of "Proxy Server
Settings" (
100) and the
router
100) or
100), then press [OK].
≥ Refer to the operating instructions of the hub or router.
≥ Home Network ( DLNA ) Server function setting can be set
only when you selected "Off" for "Power Save in Standby"
in "Easy Setting". (
15, step 7)
≥ Even if you set "Home Network ( DLNA ) Server function"
to "Off", it is possible to set to "On" later. (
≥ You can perform this setup anytime by selecting "Network
Easy Setting" in the Setup menu. (
≥ You can redo these settings individually using "Network
Settings". (
100)
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings
(encryption level, etc.) of the Wireless router might
change. When you have trouble getting online on your PC,
perform the network settings on your PC in accordance
with the settings of Wireless router.
≥ Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking
of data such as personal or secret information.
101)
100)
Advertisement
