Advertisement
When you experience problems with
settings
∫ Wireless Settings
≥If there is no problem, the following screen is
displayed.
Wireless Settings
Complete.
Network name
:
(SSID)
Wireless type
:
Authentication type
:
Encryption type
:
Reception
:
For better performance of Home Network (DLNA), it is
recommended using a wireless access point
compatible with 802.11n (5GHz).
Press OK to check network connection.
OK
≥If there is any problem, the following message is
displayed on the screen.
Display
A conflict with other
devices occurred.
A time out error
occurred.
An authentication
error or a time out
error occurred.
A device error
occurred.
Check the following
≥Please wait a few
moments, and then try
again.
≥Setting of the Wireless
router for MAC Address
etc.
≥The signal may be weak.
[BWT700] Using the USB
extension cable supplied
with the Wireless LAN
Adaptor, adjust the
position of the Wireless
LAN Adaptor.
≥The SSID and the
encryption key of the
Wireless router.
≥Please wait a few
moments, and then try
again.
≥[BWT700] Connection of
Wireless LAN Adaptor
≥If there is no improvement
in symptom, contact your
dealer.
∫ Network Easy Setting ( Home Network
Connection Check )
≥If there is no problem, the following screen is
displayed.
e.g., "Wireless" connection
Network Easy Setting ( Home Network Connection Check )
Completed.
1. Wireless setting
: Pass
2. IP address setting
: Pass
3. Connection to gateway
: Pass
Network connection check has finished.
Press OK.
OK
≥If there is any problem, the following message is
displayed on the screen.
Display
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
Check the
following
≥Connection of
"Fail"
the LAN
cables (
≥Settings of
"Fail"
the hub and
router
"Fail"
≥Connection
"Pass"
and settings
of the hub
and router
"Fail"
≥Settings of
"IP Address /
"Fail"
DNS
Settings"
(
100)
"Pass"
"Pass"
"Fail"
"Pass"
"Home
network
available"
"Fail"
12)
17
VQT3C13
Advertisement
