Oil Pump, Oil Pump Chain And Gasket Holder Plate Inspection - Suzuki Grand Vitara 2011 Manual

5) Install oil pump (1) and tighten oil pump bolts to
specified torque.
Tightening torque
Oil pump bolt (a): 24 N·m (2.4 kgf-m, 17.5 lb-ft)
(a)
6) Install oil pan and oil pump strainer referring to "Oil
Pan and Oil Pump Strainer Removal and Installation:
For F9Q Engine".
7) Install new crankshaft oil seal to gasket holder plate
using special tool as follows.
Special tool
(A): 09911–96520
a) Fit new oil seal (1) to special tool.
b) Install oil seal tapping special tool with a plastic
hammer.
8) Install timing belt referring to "Timing Belt and Belt
Tensioner Removal and Installation: For F9Q Engine
in Section 1D".
Engine Lubrication System: For F9Q Engine 1E-30
Oil Pump, Oil Pump Chain and Gasket Holder
Plate Inspection
Oil Pump
Check teeth of oil pump sprocket for wear or damage.
If any malcondition is found, replace oil pump assembly.
1
I5JB0B150036-01
Oil Pump Drive Sprocket
Check teeth of oil pump drive sprocket for wear or
damage.
If any malcondition is found, replace oil pump drive
sprocket.
Oil Pump Chain
Check oil pump chain for wear or damage.
If any malcondition is found, replace oil pump chain.
I5JB0B150037-01
Gasket Holder Plate
Check gasket holder plate (1) and oil pump chain guide
(2) for wear or damage.
If any malcondition is found, replace gasket holder and/
or oil pump chain guide.
S6JB0A1536005
I5JB0B150038-01
I5JB0B150039-01
I5JB0B150040-01
I5JB0B150044-01