Starting Motor Inspection - Suzuki Grand Vitara 2011 Manual

Starting Motor Inspection

Plunger
Inspect plunger for wear. Replace if necessary.
Magnetic Switch
Push in plunger and release it. The plunger should
return quickly to its original position. Replace if
necessary.
Pull-In coil open circuit test
Check for continuity across magnetic switch "S" terminal
and "M" terminal. If no continuity exists, coil is open and
should be replaced.
Starting System: For Petrol Engine Model 1I-7
Hold-In coil open circuit test
S6JB0A1916003
Check for continuity across magnetic switch "S" terminal
and coil case. If no continuity exists, coil is open and
should be replaced.
IYSQ01190027-01 Rear Bracket Bush
Inspect bush for wear or damage. Replace if necessary.
Brush
• Check brushes for wear.
Measure length of brushes and if below the limit,
IYSQ01190028-01 replace the brush.
Brush length
Standard: 12.3 mm (0.48 in.)
Limit: 5.5 mm (0.22 in.)
IYSQ01190029-01
• Install brushes to each brush holder and check for
smooth movement.
IYSQ01190030-01
IYSQ01190031-01
IYSQ01190032-01