Huawei UPS5000 User Manual page 18

UPS5000 Optional BSC Card
User Manual
Figure 3-7 Installing cables
(1) ECMs of the slave systems
Step 4 Check that the UPS output of the master system is not energized.
Step 5 Install six terminal blocks on any UPS in the master system.
Figure 3-8 Installing terminal blocks
Step 6 Install cables between output sampling terminals and terminal blocks.
The cables in the following figure need to be prepared onsite using the configured
cables (BOM number: 25030395) and single cord end terminals (BOM number:
14170097).
Issue 03 (2022-09-16)
NO TE
If the guide rail is not long enough, remove one side panel from five terminal blocks.
Ensure that the outermost terminal block has a side panel.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Optional BSC card of the slave system
3 Installation
13