Huawei SUN2000-250KTL Series User Manual page 51

SUN2000-(250KTL, 280KTL, 300KTL, 330KTL) Series
User Manual
Crimping an OT or DT Terminal
● Avoid damaging the core wire when stripping a cable.
● The cavity formed after the conductor crimp strip of the OT or DT terminal has
● Wrap the wire crimping area with heat-shrink tubing or insulation tape. The
● Use a heat gun carefully to avoid heat damage to the equipment.
Figure 5-7 Crimping an OT terminal
(1) Cable
(4) OT terminal
Issue 02 (2022-12-20)
NO TICE
been crimped must wrap around the core wires completely. The core wires
must be in close contact with the OT or DT terminal closely.
heat-shrink tubing is used in this section as an example.
Copyright © Huawei Technologies Co., Ltd.
(2) Core
(5) Hydraulic pliers
5 Installing Cables
(3) Heat-shrink tubing
(6) Heat gun
45