NEC VT695 Control Commands page 18

*direct setting of volume
*volume increment/decrement
*direct setting of brightness
*brightness increment/decrement
*direct setting of color
*color increment/decrement
*direct setting of contrast
*contrast increment/decrement
*direct setting of sharpness
*sharpness increment/decrement
*direct setting of tint
*tint increment/decrement
brightness
contrast
color
tint<hue>
sharpness
Not supported "LT170","VT60 series","VT70 series","VT80 series", "VT90 series"
Not supported "HT410/HT510","LT180/LT25/LT30/LT35"
volume
Not supported "LT170","VT60 series","VT70 series" (except "VT80 series, VT90 series")
Not supported "HT410/HT510","LT180/LT25/LT30/LT35"
Command:
03H 10H 00H 00H 05H DATA01 .. DATA05 CKS
DATA01 : 00H (Brightness)
01H (Contrast)
02H (Color)
03H (Tint<Hue>)
04H (Sharpness)
05H (Volume)
DATA02 : FFH (except "Volume")
00H ("Volume" only)
DATA03 : 00H (direct settings)
01H (increment/decrement)
DATA04 : lower data (8bit)
DATA05 : upper data (8bit)
ex.1) volume direct setting (value = 20)
DATA01 : 05H (Volume)
DATA02 : 00H ("Volume" only)
DATA03 : 00H (direct setting)
DATA04 : 14H (lower data : 20 = 0014<Hex>)
DATA05 : 00H (upper data : 20 = 0014<Hex>)
ex.2) brightness increment (value = +1)
DATA01 : 00H (Brightness)
DATA02 : FFH (except "Volume")
DATA03 : 01H (increment/decrement)
DATA04 : 01H (lower data : +1 = 0001<Hex>)