Table of Contents
Advertisement
Installation
Wall Mounting
The dimensions of the unit are: width – 8.48" (215.4 mm), height – 7.28" (185 mm), depth –
3.35" (85 mm), weight – 3.3Lb (1.5kg) maximum (see Figure 9).
Figure 9 Dimensions of IRRInet-M RTU DC Plastic Case
The unit can be installed on screws or on DIN rail mounting. Before installing the IRRInet-M
DC RTU, verify that there is sufficient space around the unit. Allow 7.87" (200 mm) from the
bottom of the box for the TB connectors. For models with external radios, allow 3.15"
(80 mm). In order for the two wings of the IRRInet-M to open properly, be sure to leave 2.4"
(60 mm) to the left of the unit and 1.6" (4 cm) to the right of the unit.
Wall Mounting with Screws
The IRRInet-M DC unit can be mounted on the wall using screws, as shown in Figure 10.
1. Secure two screws (maximum head size 0.37" (9.5 mm)) on the wall, 4.1" (105 mm) apart.
2. Hang the unit on the screws, fitting the two cavities on the back cover of the unit over the
screws (see Figure 10).
The screws used should not protrude from the wall surface by more than 0.23" (6 mm) or by
less than 0.16" (4 mm).
18
Advertisement
Table of Contents
