Appendix D: Mounting A Plastic Box; General; Mounting The Plastic Box; Din Rail Mount - Motorola IRRInet-M DC Owner's Manual

APPENDIX D: MOUNTING A PLASTIC BOX

General

This chapter describes how to mount a plastic box, used to house components such as the
RS485 Connection Box (V186AD/FLN3641A.) The box can be mounted on a DIN Rail or on
the wall.
The mounting kit is not supplied with basic models, but can be ordered as Bracket + Clips
(FHN6337B). The kit includes:
•
two screws (Motorola Part #0308390Y81),
•
two DIN Rail clips (Motorola Part #0786144U08)
•
one mounting bracket (Motorola Part #0789422V94).

Mounting the Plastic Box

DIN Rail Mount

1. Use the two screws to attach the two DIN Rail clips
to the mounting bracket, as shown in Figure 26.
2. Insert the tab at the bottom of the plastic box
into the bottom groove of the bracket. Insert
the rest of the plastic box into the bracket,
fitting the two round pegs into the two holes
and the upper tab into the upper groove.
Press until the upper tab clicks in the groove.
(See an example of a plastic box in Figure
27.)
Figure 26 Attaching DIN Rail Clips
Figure 27 Connecting Plastic Box to
Bracket
45