Check Head Nozzles (Maintenance Mode 09); Adjustment Of Software Correction For Inclination/Corrugation/Ruled Lines (Maintenance Mode 65); Updating Of Paper Feeding Correction Values (Maintenance Mode 58); Adjustment Of Margins In Borderless Printing (Maintenance Mode 66) - Brother MFC-J2320 Service Manual

6.1

Check head nozzles (Maintenance mode 09)

Check head nozzles, referring to
6.2 Adjustment of software correction for inclination/corrugation/ruled lines
(Maintenance mode 65)
Refer to Chapter 5, Section
6.3

Updating of paper feeding correction values (Maintenance mode 58)

Refer to Chapter 5, Section
6.4

Adjustment of margins in borderless printing (Maintenance mode 66)

Refer to Chapter 5, Section
6.5

Check printing

Under Section 1.16
steps for "Updating of paper feeding correction values", "Adjustment of software
correction for inclination/corrugation/ruled lines" and "Adjustment of margins in
borderless printing".
Section
1.3.23.
1.3.19.
1.3.24.
"Check scanning and printing" in this chapter, refer to and take
4-20
2.3.
Confidential