Error Indication; Error Code - Brother MFC-J2320 Service Manual
Inkjet dcp/mfc
Hide thumbs
Also See for MFC-J2320:
- Basic user's manual (80 pages) ,
- Quick setup manual (2 pages) ,
- Web connect manual (74 pages)
Table of Contents
Advertisement
3
ERROR INDICATION
To help the user or the service personnel promptly locate the cause of a problem (if
any), the machine incorporates the self-diagnostic functions which display error
messages for equipment errors.
3.1
Error Code
Error
Code
drive is started, triggering switchback sensor as paper feeding condition.
during switchback.
13
during switchback.
Paper jam during duplex ejecting
15
when ejecting the paper.
- Paper width is wider than 301.5 mm (detection by paper width sensor)
17
- Paper length is longer than 245.9 mm (detection by registration sensor)
- Paper length is shorter than 143.5 mm (detection by registration sensor)
18
numbers in the second side paper re-feed.
20
21
The ink cartridge detection sensor and the ink remaining sensor are detecting.
22
The ink cartridge detection sensor and the ink remaining sensor are detecting.
23
The ink cartridge detection sensor and the ink remaining sensor are detecting.
- Identification no match
24
- Judging as incompatible cartridge
- Detecting setting wrong color
25
Cannot communicate with ink cartridge IC chip (ink cartridge side.)
Contents
2-10
Refer to
page:
2-20
2-20
2-21
2-21
2-22
2-23
2-24
2-24
2-24
2-24
2-25
2-25
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
