Fuel Pump Replacement - Polaris RZR 900 2017 Service Manual

Hide thumbs Also See for RZR 900 2017:

Table of Contents

9. If the pump still does not operate, check for correct

ECU operation by plugging in a known-good ECU of

the same model.

If the pump still does not operate, replace the fuel pump

FUEL PUMP REPLACEMENT

1. Move the vehicle to a well ventilated area. Shift the

transmission into Park and turn the ignition key off.

2. Remove the passenger seat.

Always wear safety goggles when working with high

pressure or flammable fluids. Failure to do so could

result in serious injury or complications.

3. On S 1000 models only, remove the fuel pump close

off panel by pinching in the tabs and pulling up.

4. On S 1000 models only, remove the rubber fuel pump

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

5. Be sure the top of the fuel tank is clean

requires cleaning, hand wash the top of the tank to

ensure no debris will enter the fuel system when the

fuel pump is removed.

Failure to clean area around fuel pump may lead to

debris entering the fuel tank during service. Excessive

debris in fuel tank may cause premature wear of fuel

pump and/or clogging of internal fuel filters.

6. Ensure that static has been discharged by touching a

ground source such as the engine or frame.

Table of Contents