Fuel Injector Test; Fuel Injector Replacement - Polaris RZR 900 2015 Service Manual

FUEL SYSTEM

FUEL INJECTOR TEST

NOTE
Take note of PTO and MAG fuel injector harness
connectors before disconnecting them. The harness
leads are marked with PTO and MAG identifiers
The fuel injectors are non-serviceable. If diagnosis
indicates a problem with either injector, test the
resistance of the fuel injector (s) by measuring between
w
the two pin terminals :
Fuel Injector Resistance Specification:
11.4 - 12.6 Ω
NOTE
Be sure to connect the PTO harness lead to the PTO
injector and the MAG harness lead to the MAG injector
to ensure proper engine operation.

FUEL INJECTOR REPLACEMENT

CAUTION
Be sure the engine has cooled enough to work on.
9926814 R08 -
4.8
1. Remove the cargo box assembly (see Chapter 10 –
Cargo Box Removal, page 10.20.
2. Loosen the hose clamps
w
plenum to the throttle body.
q
.
3. Remove the two screws
plenum.
4. Remove the driver's seat and disconnect the negative
battery cable.
5. Disconnect the fuel injector harness leads
2015-2016 RZR 900
q
retaining the intake
e
retaining the intake
r
.
2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.