Scheduled Recording - Sanyo FWZH776F Owner's Manual

5
Press [ C (Stop) ] to Stop Recording.
• Confirmation message will appear. (Recording
will be continued.) Select "Yes" to Stop
Recording. Select "No" to Continue Recording.
• You can also Stop Recording by pressing
[ C (Stop) ] button twice at Step 5.
■
To Stop Recording the One-Touch Timer
Recording within the specified Time:
• Press [ C (Stop) ]. Confirmation message will
appear. Select "Yes" to Stop Recording.
Note(s)
• While HDD / External HDD / DVD is in Playback,
the [ REC ] mode is not available. Stop the Playback
before using Basic Recording or One-Touch Timer
Recording.
• When you press [ REC ], Recording Starts
immediately and continues until the HDD or External
HDD or DVD is full, a Program is Recorded up to 8
hours or you Stop the Recording.
• When the unit's Clock has not been set yet and the
Auto Clock Setting is set to "Off", the unit will enter
"Clock Setting" or if the Auto Clock Setting is set
to "On", the unit will enter the Clock Data search
screen to set the Date and Time for this unit.
• If Playback and Recording are in progress at the
same Time and you press [ C (Stop) ], Playback will
Stop.
• During the Recording, it is prohibited to change the
Channel [FWZH576F only].
• When Recording and Dubbing are in progress at the
same Time and you press [ C (Stop) ], the Dubbing
Cancel Confirmation window will appear.
Note(s) for One-Touch Timer Recording
• Press [ DISPLAY ] to see the remaining Recording
Time.
• You cannot use the Pause function during One-
Touch Timer Recording.
EN - 30

Scheduled Recording

You can Program the unit to Record up to 100 Programs
within a month in advance. Daily or Weekly Program
Recordings are also available.
■
Before Recording, make sure to...
• Set the Clock before setting a Scheduled
Programming.
• Register an External HDD with this unit
beforehand if you are Recording to an External
HDD. (Refer to 'External HDD Connection' on page
20.)
• If you are Recording to a DVD, insert a Recordable
Disc into this unit.
■
Guide to Scheduled Programming Display
1
3 4
1. Title of a Scheduled Program (Contains Title
Name, Date, Time, Channel and Broadcast
Station.)
2. Current Date and Time
3. Recording Icon (Appears when Recording is in
Progress)
4. Recording Media ("
HDD) or (DVD))
1
Press [ SCHEDULE REC. ].
2
Select "New Program" using [ K / L ],
then press [ OK ].
• The cursor will be on "New Program".
2
" (HDD) or " " (External
Continued on next page.