Table of Contents
Advertisement
To Stop the Scheduled Recording in Progress
Press [ C (Stop) ] on the Remote Control.
1.
2.
Confirmation message will appear. Select "Yes",
then press [ OK ].
Checking, Deleting or Correcting the Scheduled
Programming information
1.
Press [ SCHEDULE REC. ].
2.
Check the information.
3. A:
:
To Delete a Scheduled Program:
1 Use [ K / L ] to Select the Program you wish to
Delete, then press [ CLEAR ].
• Confirmation message will appear.
2 Use [ K / L ] to Select "Yes", then press [ OK ].
3. B:
:
To Delete Multiple Scheduled Programs:
1 Press [ MENU ] to move to Sub Menu then Select
"Delete Multiprogram(s)" using [ K / L ], then press
[ OK ].
2 Select the Program you wish to Delete using
[ K / L ], then press [ OK ].
• Check Icon will appear for the Scheduled
Program Selected for Deletion.
3 Repeat step 2 until you Select all the Programs you
wish to Delete.
• To remove the Check Icon for Deletion, move
the cursor to the Selected Program and press
[ OK ].
4 Press [ 1 (Cursor)] to Select [ OK ] on the screen,
then press [ OK ].
• Confirmation message will appear.
5 Select "Yes" using [ K / L ], then press .[ OK ]
3. C:
:
To Correct the Scheduled Program:
1 Select the Program you wish to correct using
[ K / L ], then press [ MENU ].
2 Select "Program Change" using [ K / L ], then
press [ OK ].
3 Correct the Scheduled Program Information using
[ K / L / 0 / 1 ], then press [ OK ].
Note(s)
• With the Scheduled Recording in progress (which
is shown in red in the Scheduled Program List), you
can only Edit the End Time.
EN - 32
Skip the Scheduled Recording Period
You can deactivate the Scheduled Recording period (Daily,
TUE-SAT, MON-SAT, MON-FRI or Weekly) temporarily.
1.
Press [ SCHEDULE REC. ].
2.
Select the periodical Scheduled Recording
Program you wish to Skip using [ K / L ], then
press [ MENU ].
Select "Skip" using [ K / L ], then press [ OK ] to
3.
Activate the Setting.
• "Skip" will appear on the left side of the
Scheduled Program, if "Skip" is Activated.
• The setting will go back to Off after the Program
is Skipped once.
If the Scheduled Program Did Not Complete Correctly,
appears in the Scheduled Programming List.
• A Program that did not complete correctly is grayed
in the Scheduled Programming List.
• To check the Scheduled Programming error
message, Select the Program that did not complete
correctly and press [ OK ].
Hints for Scheduled Recording
• If there is a Power failure or this unit has been
unplugged the Clock Setting will be lost. The Scheduled
Programming(s) will be kept. (If Manual Clock has been
Selected then you must set the Clock in order for the
saved Scheduled Recordings to be made.)
• When Recording to an External HDD, if the External
HDD is unregistered, the unit will perform Alternate
Recording to the HDD (refer to page 31).
• When Recording to a DVD, if an unrecordable disc
is inserted into this unit, the unit will perform an
Alternate Recording to the HDD (refer to page 31).
• When the Programmed Starting and Ending Time
are earlier than the current Time, the setting will not
be accepted and the Date field will be highlighted.
• If the Starting Time is earlier and the Ending Time is
later than the current Time, the Recording will Start
right after you press [ OK ] at step
• It is prohibited to change the Channel from 2
minutes before the Programmed Starting Time.
[FWZH576F only]
• [ REC ] does not work from 2 minutes before the
Programmed Starting Time. If it comes to 2 minutes
before the Starting Time during basic or One-Touch
Timer Recording, the Recording in progress will be
Stopped.
on page 31.
9
9
Continued on next page.
Advertisement
Table of Contents
