Motorola MVME2400 Series Installation And User Manual page 19

Overview of Start-Up Procedures
The following table lists the things you will need to do before you can use
this board, and tells where to find the information you need to perform each
step. Read this chapter in its entirety along with all Caution and Warning
notes before beginning.
Requirement
Unpack the hardware.
Set jumpers on the MVME2400x
module.
Prepare the PMCs.
Prepare the PMCspan module(s).
Prepare any other optional devices
or equipment you'll be using.
Install the PMCs on the
MVME2400x module.
Install the primary PMCspan
module (if used).
Install the secondary PMCspan
module (if used) (Cont'd).
http://www.motorola.com/computer/literature
Table 1-3. Start-Up Overview
Applicable Reference
Unpacking the MVME2400x2400x
Hardware
Preparing the MVME2400x Hardware
MVME2400x
PMCs
For additional information on PMCs, refer to the PMC
manuals provided with these cards.
PMCspan
For additional information on PMCspan,
refer to the PMCspan PMC Adapter Carrier
Module Installation and Use manual, listed
in Appendix A.
For more information on optional devices and equipment,
refer to the documentation provided with that equipment.
PMCs
PMC Slots
For additional information on PMCs, refer to the PMC
manuals provided with these cards.
Primary PMCspan
For additional information on PMCspan,
refer to the PMCspan PMC Adapter Carrier
Module Installation and Use manual, listed
in Appendix A.
Secondary PMCspan
For additional information on PMCspan,
refer to the PMCspan PMC Adapter Carrier
Module Installation and Use manual, listed
in Appendix A.
Overview of Start-Up Procedures
Page No.
1
1-7
1-7
1-7
1-12
1-12
A-1
1-12
2-7
1-14
A-1
1-17
A-1
1-5