2.
Rack Installation Specifications
Rack Installation Requirements
●
Installing 2U DEs in the Same Rack (When Only One Controller Is Installed)
This section describes a connection configuration in which all of the enclosures are installed in the same rack.
The following figure shows an example when one controller enclosure (2U) and ten drive enclosures (2U) are
installed in a rack.
For this type of configuration, connections between enclosures can be performed with the cables that are provi-
ded with the drive enclosures. Obtaining extra extension cables is not required.
Figure 25 Connection Example 1 (2U DE Connections in the Same Rack)
DE#0A (2U)
DE#09 (2U)
DE#08 (2U)
DE#07 (2U)
DE#06 (2U)
DE#05 (2U)
DE#04 (2U)
DE#03 (2U)
DE#02 (2U)
DE#01 (2U)
Cables that are supplied as standard
0.75m
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Site Planning Guide
CE
Copyright 2021 FUJITSU LIMITED
48
P3AM-7632-18ENZ0