Figure 29 Connection Example 5 (Connections When 2U And 4U Des Are Used Together In The Same Rack) - Fujitsu ETERNUS DX100 S4 Site Planning Manual

2. Rack Installation Specifications
Rack Installation Requirements
●
Installing 2U and 4U DEs in the Same Rack (When Two Controllers Are Installed)
This section describes a connection configuration in which all of the enclosures are installed in the same rack.
The following figure shows an example for installing one controller enclosure, four high-density drive enclosures
(4U), and two drive enclosures (2U) in the same rack.
For this type of configuration, obtaining extra extension cables to connect 4U drive enclosures and 2U drive en-
closures is required.

Figure 29 Connection Example 5 (Connections When 2U and 4U DEs Are Used Together in the Same Rack)

Cables that are supplied as standard
0.75m
2.5m
Extension cables
2.5m
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Site Planning Guide
DE#06 (2U)
DE#05 (2U)
DE#04 (2U)
DE#03 (2U)
DE#02 (4U)
DE#01 (4U)
CE
Copyright 2021 FUJITSU LIMITED
52
P3AM-7632-18ENZ0