NEC Express5800 Series Manual page 19

Page.19
When using a maintenance guide, please paraphrase about the following table.
■ For B120e-h
chapter Section
2 1.2.2
(1) Processor Configuration submenu
Wrong: This item is not displayed.
Correct:
2 2.2.2 (2) Memory Configuration submenu
Wrong:
Correct:
2 1.2.2
(3) PCI Configuration submenu
Wrong: This item is not displayed.
Correct:
2 1.2.2
(3) PCI Configuration submenu
Wrong: ― I/O Blade
Correct: ― I/O Blade
Notes on using the Maintenance Guide
PPIN Support
Memory Frequency Limit
Memory Frequency Limit
AER Support
(a) PCI Device Controller and Option ROM Settings submenu
See (b)I/O Blade submenu for this item.
This item is displayed when N8404-001F AD106a, N8404-003F AD106b, N8404-007F AD106c and
N8404-005F AT101b are installed.
See (b)I/O Blade submenu for this item.
This item is displayed when N8404-007F is installed.
paraphrased contents
Enables or disables Protected Processor Inventory Number
[Disabled]
Enabled
This option is displayed only when the installed processor
supports this featue.
Specify the upper limit of operating frequency of
[Auto]
memory. The operating frequency may be lowered than the
800 MHz
specified value depending on memory configuration.
1066 MHz
1333 MHz
1600 MHz
1866 MHz
Specify the upper limit of operating frequency of
[Auto]
memory. The operating frequency may be lowered than the
800 MHz
specified value depending on memory configuration.
1066 MHz
1333 MHz
1600 MHz
Enables/Disables to grant the function that the OS controls
Enabled
PCIe Advanced Error Reporting.
[Disabled]
But Onboard LAN / VGA is out of the function.